Filter Photos By
Reset Filters

Viewing: Thermal Cutting

Robust Housing

Machines
A rigid machine frame improves accuracy with robotic arm movements and limits noise levels caused from machining processes.
Machine: PeddiBot-1200
View Full Image

Robotic Plasma Cutting

Machines
PeddiBot-1250ST
Machine: PeddiBot-1250ST
View Full Image

Plasma ArcWriting

Machines
Faster than carbide scribing and easier to maintain than a laser, the PeddiBot-1200 utilizes modern layout marking plasma technology.
Machine: PeddiBot-1200
View Full Image

Camera System

Machines
This system is significantly faster than laser or touch probing machines.
Machine: PeddiBot-1250ST
View Full Image

Plasma Cut Beams

Machines
The PeddiBot-1200 comes equipped with a Kjellberg HiFocus 440 amp plasma cutting system. The Kjellberg is designed to combine faster cutting speeds, rapid process cycling, quick changeovers and high reliability to maximize productivity.
Machine: PeddiBot-1200
View Full Image

Plasma Cut Beams

Machines
PeddiBot-1250ST
Machine: PeddiBot-1250ST
View Full Image

Plasma Cut Beams

Machines
The PeddiBot-1200 applies a unique cutting technique that compensates the torch height position and tilts the torch backwards during near-flange cutting.
Machine: PeddiBot-1200
View Full Image

Plasma Cut Beams

Machines
PeddiBot-1250ST
Machine: PeddiBot-1250ST
View Full Image

Laser Measurement

Machines
Eliminate timely probing methods and manual errors with laser precise measurement.
Machine: PeddiBot-1200
View Full Image

Roller Feed Measuring Wheel

Machines
Maintaining accurate measurements without any hesitation in production is crucial. Accuracy is not compromised even despite deviations in material.
Machine: PeddiBot-1250ST
View Full Image

Common Rat Holes

Machines
The most commonly used rat hole within the structural steel industry can now be processed with a unique torch path cutting technique.
Machine: PeddiBot-1200
View Full Image

Plasma Cut Beams

Machines
The PeddiBot-1250ST comes equipped with a Hypertherm XPR 300 (300 amp) plasma cutting system. The XPR 300 is designed to combine faster cutting speeds, rapid process cycling, quick changeovers and high reliability to maximize productivity.
Machine: PeddiBot-1250ST
View Full Image

Plasma Cut Angle

Machines
Plasma cut beams, tubes, channels and angle on the PeddiBot-1200.
Machine: PeddiBot-1200
View Full Image

Material Clamping

Machines
With a fully electric design, it eliminates the need for hydraulics, using a precise electric actuator for horizontal clamping.
Machine: PeddiBot-1250ST
View Full Image

Plasma Cut Beams

Machines
The PeddiBot-1200 utilizes the most intelligent cutting directions to make sure the final piece has the cleanest edge possible.
Machine: PeddiBot-1200
View Full Image

Advanced Software

Machines
Once material has been scanned, a real-time 3D point cloud is displayed for easy monitoring of each piece being processed.
Machine: PeddiBot-1250ST
View Full Image

Triple Torch Oxy-Fuel

Machines
Three torches for simultaneous oxy-fuel cutting create an unmatched combination of speed and efficiency.
Machine: ABCM-1250
View Full Image

Oxy-Fuel Cut Tube

Machines
Oxy-fuel cut beams, tubes, channels and angle on the ABCM-1250.
Machine: ABCM-1250
View Full Image

Oxy-Fuel Cut Angle

Machines
Oxy-fuel cut beams, tubes, channels and angle on the ABCM-1250.
Machine: ABCM-1250
View Full Image

Roller Clamping System

Machines
Vertical hydraulic hold down roller clamps are furnished on both the entry and exit side of the ABCM-1250 in order to secure the part during positioning and burning.
Machine: ABCM-1250
View Full Image

Versatile Plasma Cutting

Machines
What makes the Ring of Fire perfect for fabricators is it’s advanced 360º approach to cutting sections. This machine not only acts as a coper, drill line, band saw and angle line, but it also can mark on all 4 sides of the profile.
Machine: Ring of Fire
View Full Image

Hypertherm Plasma Unit

Machines
A single Hypertherm plasma torch is fixed to a rotating ring, capable of revolving in excess of 360º around the profile being processed.
Machine: Ring of Fire
View Full Image

Plasma Cut Tube

Machines
The Ring of Fire processes on all 4 sides of a tube, beam, angle or channel and even mark on all 4 sides of any structural profile.
Machine: Ring of Fire
View Full Image

Plasma Cut Beams

Machines
The Ring of Fire processes on all 4 sides of a tube, beam, angle or channel and even mark on all 4 sides of any structural profile.
Machine: Ring of Fire
View Full Image

Bevel with Oxy-Fuel and Plasma

Machines
Plasma cutting on the PeddiBot-1250 is supplemented by an oxy-fuel cutting system configured to accommodate material thickness of up to 6” (150 mm).
Machine: PeddiBot-1250
View Full Image

Superior Clamping System

Machines
The PeddiBot-1250 employs a series of material support clamps that provide secure holding of the profile while inside the machine and minimize vibration during processing.
Machine: PeddiBot-1250
View Full Image

Plasma Cut Plate

Machines
The PeddiBot-1250 processes on all 4 sides of a beam, tube, angle or channel and even handles flat bar and plate.
Machine: PeddiBot-1250
View Full Image

Hypertherm ArcWriting

Machines
Faster than carbide scribing and easier to maintain than a laser, the PeddiBot-1250 utilizes modern Hypertherm ArcWriting technology.
Machine: PeddiBot-1250
View Full Image

Plasma Cut Beams

Machines
The PeddiBot-1250 comes equipped with a Hypertherm HPR400XD plasma cutting system. Designed to maximize productivity with faster cutting speeds, this system is capable of processing up to 3” (80 mm) thick material.
Machine: PeddiBot-1250
View Full Image

Plasma Cut Tube

Machines
The PeddiBot-1250 processes on all 4 sides of a tube, beam, angle or channel and even marks on all 4 sides of any structural profile.
Machine: PeddiBot-1250
View Full Image

3-Station Tool Changer

Machines
The PeddiBot-1250 makes quick work of tool changes with three conveniently positioned torches for unobstructed access.
Machine: PeddiBot-1250
View Full Image

Oxy-Fuel Cut Jumbo Beams

Machines
Designed specifically for the structural steel market, the PeddiBot-1250 falls nothing short of robust and can more than endure the tough environments that are most common in the steel industry.
Machine: PeddiBot-1250
View Full Image